Fatbike motor cable for Bafang 1000W RM G062, 750W RM G06 snow bike hub motor.

The female cable with black connector is about 80cm, the phase wire adapts Φ5 BBS bullet connector which can bear larger current.

The female cable with red connector is about 120cm length;

The extension cable length is 110cm.

Bafang RM G062 48V 750w / 1000W hub motor,  it is an upgraded version for  RM G060 fat-bike motor.

This high torque motor, max torque to be 85Nm, can be used for eFat or Electric cargo bikes which enable you electric snow-bike or e-cargo bike to run effectively. 

9pin split motor cables; cable length: 1m.

Bafang has two types connectors for this motor. One is with red connector and the other is with the black connector.

For 1000W motor, our190mm forksize motors is with black connector while the 175mm forksize motor is with the red connector. Please check the pictures on our website and choose the right one.

For 750W motor, the forksize is 175mm with new version red connector, please note.

Bafang 500W/750W rear hub motor SWX02 /RM G020; this motor was called SWX02 motor before, now Bafang name it RM G020  model. It has two types threaded freewheel type and cassette freewheel type.

48V350W

48V500W

36V350W

36V500W

For threaded freewheel type, fork size is 135m;

For cassette freewheel type, fork size is 138mm.

Hall sensored with 9ppin motor cable

This SWX02 hub engine is also compatible with 6 hole disc brake;

RM G020 motor is with 36 spoke holes.

Bafang hub motor clutches for 8FUN BPM,CST, RM G07 /H610 /H620 etc motors. The clutch is with 42T nylon gears.

The clutch has two versions, the old version has 4 key slots and the new version has only one key slot, please check your own motor clutch before making the order. By the way, the new clutch can be used for both BPM motors or Bafang CST motors(produced after 2014).

The clutch includes gears. 

We stopped selling the old version BPM/CST/RM G070 motor clutch because according to a few customer's feedback, the old version clutch cannot fit their BPM/CST/H610/H620 hub motor.

We are currently selling 3 types of Bafang hub motor clutches. The difference for the three types clutch: BPM/CST/H610 clutch uses 42T nylon gear; SWXK/SWXH/RM G010 clutch uses small 36T nylon gear(we have this nylon gear available on our website); SWX02 clutch uses bigger 36T nylon gear(48mm in diameter, 14mm in thickness; we don't have this big 36T nylon gear available currently). The only difference for the two SWX02/RMG 06 fatbike motor clutches is the inner bearing of the nylon gear, theoretically, the two clutches are compatible with each other.

Some Bafang motors share the same motor clutch, therefore if you don't know what Bafang model your motor is, you can measure the dimension of your original clutch, if it is the same dimension as ours, then you can order it for your motor.

All our motor clutches are sourced directly from Bafang.

For how to replace Bafang hub motor clutch, please refer to the following video:

Ebike brushless hub motor torque washers;12mm diameter with a flat of 10mm