36V 250W brushless sine wave e-bike controller(CON611-A).

1. This controller is silent and compatible with hall sensor or sensorless motors;

2. It has head light or tail light leads enable you to connect a headlight and tail light for your electric bike;

3. If your bike is with hydraulic brake system, our CON611-A controller is compatible with oil brake sensor;

4. You can also connect the gear sensor to the brake sensor leads if you need the gear shifting fuction;

5. If you want to use pedal assisting sensor for this controller, only our 12 poles magent PAS(D12L) will work, this PAS is intergrated and designed for CON611-A controller and it is easy to install on the left side of the e-bike; the cable length for the 12 magnets PAS is 80cm; Other PAS may not fit for this controller, please note.

250W ebike brushless controller, 24V and 36V compatible, including LCD meter, 8 poles PAS and speed sensor.This controller reduces motor noise and you will feel the torque is stronger when changing the PAS level via the LCD panel. It is sine wave controller with torque simulation function. The controller is suitable for sensored motor only, please be noted. If you want a colorful display, you can choose LCD1, LCD3, LCD5, LCD6(coming soon),  LCD7U, LCD8S or LCD8H.  If you need LED meter, you can consider KT-890 LED or KT-900S LED meter.

Do not know which LCD meter to choose, click here fore brief comparision for the above LCD meters:  KT-LCD1/LCD2/LCD3/LCD5

E-bike Kuntent KT LCD7U  meter with 5V1A charging USB port for mobile. The LCD7U display is compatible with 24V, 36V and 48V; you can read the battery capacity and votlage, riding speed and range, accumulated mileage etc. This LCD meter must work with KT serial controllers.

If you need the users' manual for the display, please check from here: KT LCD7U user's manual

If your controller is with waterproof connector, you can add a conversion cable for this LCD meter.

E-bike power cord for connecting motor controller to ebike battery.

For connecting motor controller side, the connector could be DJ7031 connector(we no longer use it) , Φ4mm bullet connector(default power connector of our front or rear ebike controllers) or Φ5mm bullet connector(default power connector for Bafang BBS01/02 kit).

For connecting battery side, you can choose your demand connectors.

Currently, 90% front or rear brushless motor controller use Φ4mm bullet connectors for motor controller. You can check your own controller power connectors before ordering.

Default cable would be 14AWG.

If you need 12AWG wire for the power cable, please leave a message.