36V 10S Ebike battery PCM/BMS 20A/25A with small size for Hailong02/Jumboshark/Tigershark casing battery

36V 20A/25A 10S BMS/PCM for e-bike downtube batteries. This BMS is with small dimension(L80*W60*T10mm) with balance, ON/OFF switch, battery capacity LED and high temperature protection.

This battery management system(BMS) is suitable for most frame batteries, such as Hailong-02/03 casing battery, DA-5C Casing battery, DS-6 casing battery or new Polly DP-6 casing battery.

If your battery case has 5V USB output, you may also need to order a 5V PCB for your battery.

If your battery case does not have ON/OFF switch, please short circuit the ON/OFF switch wires when assemble the BMS to your pack.

36V E-bike downtube battery BMS with small dimension and balance

1. Charging voltage: DC42V (CC/CV);
2. Single cell charging balance voltage: 4.20±0.05V;
3. Single cell balance current: 67±5mA;
4. Single cell self-consumption current: ≤150μA;
5. Max continuous charging current: 5A;
6. Max continuous discharging current: 20A/25A;
7. Overcharge detecting voltage: 4.25±0.05V;
8. Overcharge detecting delay time: 0.5S-2S;
9. Overcharge recover voltage: 4.15±0.1V;
10. Overdischarge detecting voltage: 2.75±0.1V;
11. Overdischarge detecting delay time: 150-300mS;
12. Overdischarge recover voltage: 3.0±0.1V;
13. Overcurrent detecting voltage: 105±10A;
14. Overcurrent detecting delay time: 100mS-300mS;
15. Recover: recover by Cutoff load or switch;
16. Short circuit detecting: Shortcircuit externally;
17. Short circuit detecting delay time: 200-800μs;
18. Short circuit recover by by Cutoff load or switch;
19. Internal resistance: ≤20mΩ
20. Working temperature: -40~+70°C;
21. Storage temperautre: -40~+125°C;

22. ON/OFF switch

Note: Testing result for above based on 25°C; The result may be varied if testing temperature is no 25°C.