Atlas frame battery key lock  or Jumbo shark battery.  . 

If you are not sure which case the key set uses for, please check dimension or pictures for our Atlas frame battery case and Jumbo shark battery case.

Key lock for e-bike rear rack battery. We have two types key locks for rear rack battery: Internal key lock is installed inside the battery case which is also used for our rear rack battery packs; External key lock is installed outside of the battery case(fastened on the battery mounting plate), please check carefully before ordering.

If are looking for External rack key lock including rear rack battery mounting, we can also provide, please view details in the picture and order.

E-bike power cord for connecting motor controller to ebike battery.

For connecting motor controller side, the connector could be DJ7031 connector(we no longer use it) , Φ4mm bullet connector(default power connector of our front or rear ebike controllers) or Φ5mm bullet connector(default power connector for Bafang BBS01/02 kit).

For connecting battery side, you can choose your demand connectors.

Currently, 90% front or rear brushless motor controller use Φ4mm bullet connectors for motor controller. You can check your own controller power connectors before ordering.

Default cable would be 14AWG.

If you need 12AWG wire for the power cable, please leave a message.

48V Dorado battery for ebike,14AH, 17.5AH, 20AH, 21AH, or 24AH for your choice. If you want a longer mileage, you can choose the max capacity 24AH. If your motor is 1000W-1800W, then our Dorado battery will fit your ebike.

The mounting bases for the Dorado batteries are the same, if the length is the same, then you can choose this battery as a spare battery. There are only two lengths for the Dorado cases, L1=458mm or 390mm, some people would like to measure the longest part of the battery, and get 505mm or 440mm to check which model you need to choose. 

There is a 5V USB output for the Dorado case which you can charge your mobile; 

The charging connector will be 5.5x2.1DC or 5.5x2.5DC as default; if your original battery uses the 3 pin charging connector, you can choose the mini XLR 3 pin connector for the batteries; normally for plastic chargers or charging current less than 4A, the default charging connector is 5.5x 2.1DC;

For the discharging connector, the default connector is 2pin connector(female PLA0274 and male PLA0273); if your ebike runs larger current, it's better to use 6pin connectors(female PLA 0239 and male PLA 0238); Normally most of the e-bikes for power less than 750W will use 2 pin connectors. If you are confuse for the connectors, please check on our website: Tigershark / Atlas/ Dorado connectors

 If you don't know which charging and discharging connector to choose, please email us.

This battery can be a replacement for Biktrix standard battery, NCM moscow Milano Plus/Venice Plus/Moscow Plus/Aspen Plus/Miami ebike batteries, 

Dorado battery (505L) is suitable for e-bikes which from ECCOBIKE/ ADDMOTOR/ VOLTBIKE/ CIVI/ M2S/ Surface 604 bikes/ Rambo/ Quietkat/ BAKCOU....etc, while 440L Dorado battery fits for the max-cargo and G20-CARGO electric bike.

Aventon Pace 500 replacement battery.If you want a larger WH battery for the Aventon Pace 500, you can order on our website.

48V 14AH /48V17.5AH Ebike in-tube battery(SYR case), There are two lengths for this case, the shorter case(L-=354mm) is for Aventon level replacement battery; The longer case(L1=442mm) is for other intube ebike battery, such as Markhor frame intube battery. 

If you are looking for Aventon level replacement battery, only the shorter case will fit and the shorter can can max build 48V14Ah battery, please note.

There are several similar cases with different sizes, please double check before ordering. If your case sizes are the same as ours, please double check the discharging connector because with the same sizes, there are two types of connectors, 4 pins connector and 6 pins connector, they are not compatible. Please check our pictures for details.  If you are confused, please email us, send us some pictures of your current battery and we will check for you.

48V17.5AH battery is suitable for Quietkat ebikes, 2020-23 Ranger 750w/1000w, 2020-22 Warrior 750w/1000w,  2021-23 Ranger 5.0, 2021-23 Pioneer etc.

If you are looking for 52V17.5AH with the longer case, we can also build it, please email us if you need.

48V Hailong G70 battery for ebike.

 The mounting is included with the battery; Key lock is available to lock the battery on the battery mounting foot.

5pin discharging connector, there are several similar connectors, please check from here for them: Hailong discharging connector ; 

Charging port is 5.5X2.1DC or 5.5X2.5DC

Charging voltage for the 48V battery is 54.6V; recommend to charge the battery with <5Amps.

48V 14AH Reention EEL battery for ebike. This battery is installed in the bike tube; there are 4 types of these cases with different length and width. Our battery case is with L1*L2 = 430 X 354mm, and with width*height being 64*94mm. Please measure your case's sizes before ordering the battery.  You can also check the picture on our website for the case.

NCM Moscow M3 Magnum Ebike Replacement Battery.

This battery can be the replacement battery for Ride1up Core-5 or Ride1up LMT'D ebike. 

48V 17.5AH intube battery for Dengfu Carbon fibre ebike frame.

The charging port is 5.5X2.1DC as default..

The battery itself has no ON/OFF switch. The original Dengfu frame(E10/ E22/ E23) has an ON/OFF switch and a charging port on the frame. Therefore if you are looking for the battery for the original Dengfu frame, this one can be plug and play.

Important: If your existing Dengfu frame has no ON/OFF switch and charging port on the frame, please advise us and will modify the connection of the battery socket specially. 

48V Reention Rhino IR-7 in-tube battery for ebike down tube frame.

There are several types this model battery cases with different sizes, the downtube for your bike is fixed, therefore the battery case is also fixed(cannot interchangeable with other cases), please double check before ordering. The in-tube battery here is suitable for this bike frame: e-MTB full suspension ebike frame for Bafang M510 M500 M600 or M620 motors.

If you choose the smart BMS for the battery, you can view battery parameter via mobile app. 

The charging connector will be 5.5x2.1DC or 5.5x2.5DC as default; if your original battery uses the 3 pin charging connector, you can choose the mini XLR 3 pin connector for the batteries; normally for plastic chargers or charging current less than 4A, the default charging connector is 5.5x 2.1DC;

Important note: The batteries are not compatible with different size. Therefore please make sure you choose the right size for your battery.

The battery(Reention Rhino IR-7) is compatible for the following ebikes:

Aostirmotor 52V All Terrain
Bee Cool Bikes Pathfinder
Bee Cool Bikes Pathfinder Step-Thru
Belize E-rider Yul Mid-drive
Coastal Cruiser Electric Bikes 750W Folding Step-Thru 20x3
Darrvin Rove
Darrvin Crest
Darrvin Peak ll
Darrvin Peak ll Blue
Darrvin Outlet
Denago Folding 1 Ebike
Dost Kope Chain
Dost Drop Chain
Dost Drop CVT
Dost Kope CVT
Dohenybike XTS
E- Himo C26 Max
Epic Fold UP Extreme
Eahora XC300
Eahora ACE
Emojo Breeze PRO
Emojo Hurricane PRO
Fahrbike Terra
Fahrbike Cruz
Fahrbike Roadster73
Fahora XC300
Fahora XC300 Max
Fahora Ace
Fission Cycles FM 750X
Fission Cycles SO 500
Fission Cycles ST 500
Himiway Scape Pro
Himiway Zebra Zebra Step Thru
Heybike Cityrum
Heybike Brawn
HPC Trailblazer
Hiboy P7
KBO Electric Cargo Ranger
MagiCycle Deer
MagiCycle Ocelot
MagiCycle Ocelot Pro
Oto Ebike Cargo Ebike
Perraro Falcon Foldable
Rambo Venom
Rambo The Megatron
Rambo The Prowler
Ride1up Cafe Cruiser
Ride1up 700 Series
Ride 1UP Cafe Cruizer
Ride 1UP 700 Series
Snapcycle R1
Snapcycle R1 Step-Thru
Surface604 Twist
Voltbike Bravo V2
Voltbike Elegant V2
Voltbike Mariner V2
Voltbike Yukon V2
Voltbike Yukon V2 Step-Thru
Voltaride Tucker 750W
Volton Action Mid Drive
Wattwagons Hidra (Gen2)
Wattwagons Helios