54.6V 2A 120W Alloy shell charger for 48V(13S) hailong-01 casing battery, Jumbo shark new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

AC Input: 110V, 220V or 240V;

Charging current: 2A.

Charging connector: 5.5*2.1DC connector(Default); there are two types DC connector, 2.1DC and 2.5DC connector, if you are not sure your charging port is 2.5DC or 2.1DC, you can add a 2.5DC cable, you can convert the charging connector from 2.1 to 2.5 with the cable.

58.8V 3A alloy charger for 52V 14S tigershark frame battery packs;

Charging voltage: 58.8V

Charging current: 3A(larger charging current makes fast charging);

Housing: Alluminum alloy shell which is better in cooling(all the chargers will be heat when charging);

Charging connector: 5.5* 2.1DC connector which is suitable for tigershark DS-6 casing 52Vbattery or New polly DP-6 casing 52V battery;

Single cell charger 4.2V 5A, 4.2V3A, 3.65V 3A, 3.65V 5A for battery repair or balancing; If one or two cells are defective of your pack, you may need to use a single cell charger to charge the cell untill it reach the same voltage as other cells.

There is a switch between 3A and 5A;

LED indicator for charging status.

We will install Alligator clip for the end connection which you can connect to charge single cell easily.  

1500W Alluminum alloy shell charger for e-motorcycle, sightseeing bus,  tourism bus, electric car or ev batery. We can set customized charging voltage and charging current for the battery charger. 12V80A, 24V40A, 36V30A, 48V25A, 60V20A, 72V15A, 84V10A, 96V10A etc.

There are LED indicators for charging and chared status.

Alluminum alloy shell and cooling fan enable the charger will not too be hot when charging.

The handle bar makes the charger to be carried easily.

If you don't know what voltage is your charger, please email us and we will calculate the charging voltage for you.

Ebike charger for 36V, 48V, 52V batteries with3 pins mini XLR connectorfor Reention casing batteries.

The full charge voltage for 36V 10S li-ion battery is 42V;

The full charge voltage for 48V 13S li-ion battery is 54.6V;

The full charge voltage for 52V 14S  li-ion battery is 58.8V;

For the charging connector, pin 1 for positive, pin 2 for negative, pin 3 is empty, this is the default connection; if your battery has a different connection, please send us an email after placing the charger.

For the charging current, each battery would have a maximum charging current, normally the default max charging current for the batteries would be 5A; if you want higher charging current, please contact your battery supplier to check what is the max charging amps of your battery first.

36V, 48V, 52V battery charger with two charging voltages, 80% and 100% full charging voltages.

When you don't use the battery for a long time, it's better not to 100% fully charge the battery for storage.   

Full charging voltage for 36V battery: 40V and 42V; Charging current 2.5A;

Full charging voltage for 48V battery: 51V and 54.6V; Charging current 2A;

Full charging voltage for 52V battery: 55V and 58.8V; Charging current 2A;

This charger has no fuse because the fuse has been changed to the switch(switching between the two charging voltages).

The shortage for a charger without a fuse is the charger will be burned if you connect the charger reversing the positive and negative. 

The charger is with wide AC input voltage 110V -240V.

36V ebike battery with Reention Dorado cases which is built into the bike frame.

There are several Dorado cases with different dimension, but if the length is the same, different length or width cases are interchangeable which means you don't need to change the bike frame if you want a larger battery for more mileage.  

Reention develop 21700 Dorado case, therefore the max capacity could be 36V  30AH. If your bike has an original Dorado battery and you want to have a larger mileage, then the 21700 Dorado case would be suitable for you. Please note the height for 21700 Dorado case would be 5mm higher than Dorado 18650 cases.

Please measure the length of your original Dorado cases before ordering. cases are compatible with the same length.

Some customers may measure the longest part of the case, our cases is 505mm by the longest part of the case.

36V batteries with Jumbo shark /new polly casing(new polly DP-6 casing, max 70pcs 18650 cells; new Jumbo shark casing, max 91pcs cells; Larger capacity will be available with this battery case; the larger capacity the battery has, the longer distance you can ride with your ebike each time after fully charge. If you are running a Bafang BBS kit and want more capacity(Ah) for the battery, this one would be suitable for you. On/Off switch and LED capacity level showing are available for this battery.

1. Battery Capacity: 11.6AH, 13.4AH, 14.5AH, 15AH, 16.75AH, 17.4AH, 20AH,  23.45Ah, 25AH and 27AH are available;

2. Charging port: 2.1DC or 2.5DC port(for charging Amps larger than 4A, we will use 2.5DC port); We also have the Reention 3 pin mini XLR charging connector for option;

3. Max charging current: 5A

4. Discharging port: 5pins blade contacts connector for DP-5, DP-6 or DP-9;

5. Continuous discharging(BMS): 20A-60A

6. If you choose the smart BMS for the battery, you can view battery parameter via mobile app.

36V New polly Jumbo shark battery.

If you need a backup charger for this battery, please click here: 120W 2.5A 42V Alloy charger;

There are basically two types of New polly cases, You can identify the two types by the discharging connector or the mounting foot. This battery is with the 4 blades contacts connector. If your New polly battery is with 5 pin connector, please order this one: 36V New polly down tube battery;

If you choose the smart BMS for the battery, you can view battery parameter via mobile app.