This battery can be a replacement battery for SUPER73 S or S1 ebikes.

1. Battery Capacity: 11.6AH, 14AH, 14.5AH, 15AH, 16AH, 17.5AH, 20AH, 21AH, 24.5AH etc; 

2. Cells INR18650 35E or INR21700 50G

3. Charging port: 2.1DC or 2.5DC port(for charging Amps larger than 4A, we will use 2.5DC port); If you prefer mini XLR connector for charging, you can choose it.

4. Max charging current: 5A

5. Discharging port:  4pins blades contacts connector. If you need an extra mounting foot for this battery, you can order on our website: New polly mounting foot

6. Continuous discharging(BMS): 15A(for 350W motor), 20A(for 500W motor), 25A(for 750W hub motor), 30A(for 1000W engine), 40A for 1500W motor, 50A for 2000W ebike.

7. If you choose the smart BMS for the battery, you can view battery parameter via mobile app.

Note: There are mainly two typles New polly cases with different discharging connector and mounting foots, please check the picture on our website. If your discharging connectors are with 5pin discharging connector, your New polly Jumbo chark battery should be with this one: 48V New polly battery without controller space

48V Jumbo shark new polly downtube battery for ebike(new polly DP-6 casing).  Larger capacity will be available with this battery case; the larger capacity the battery has, the longer distance you can ride with your ebike each time after fully charging. If you are running a Bafang BBS kit and want more capacity(Ah) for the battery, this one would be suitable for you. On/Off switch and LED capacity level showing are available for this battery.

If you choose the smart BMS, you can view or even set the battery parameter via your mobile BMS app(Android mobile can set the parameter while IOS mobile can only change a few parameters, please note).  

This battery can be a replacement battery for SUPER73 S or S1 ebikes.

1. Battery Capacity: 11.6AH, 14AH, 14.5AH, 15AH, 16AH, 17.5AH, 20AH, 21AH, 24.5AH etc;.

2. Charging port: 2.1DC or 2.5DC port(for charging Amps larger than 4A, we will use 2.5DC port);

3. Max charging current: 5A; if you want larger charging current, please contact us.

4. Discharging port: 5pins blade contacts connector for DP-6 and PD-9 case, 4pins blades contacts for DP-4C and DP-5C case.

5. Continuous discharging(BMS): 15A(for 350W motor), 20A(for 500W motor), 25A(for 750W hub motor), 30A(for 1000W engine), 40A for 1500W motor, 50A for 2000W ebike.

Currently sending battery needs special chanel which costs higher shipping fee or custom duties and VAT; and sometimes you may need to pay extra shipping cost, or you want to add other items after you placing the order, in that case, you can use this link to finis the payment.

7S BMS(battery management system) for 24V li-ion battery. 

The BMS is small in dimension(65*35*9mm) and it can fit into many battery cases.

It has a high temperature protection sensor which will protect your battery from too hot.

52V 30A 14S BMS/PCM for e-bike downtube new polly DP-6 casing batteries. This BMS is designed for new Polly DP-6 casing battery with only 8mm in thickness which enables building larger capacity with this case;

The BMS has balance, ON/OFF switch, and high temperature protection.

Continuous discharging current to be 30A, fit for Bafang BBSHD kit.

If your battery case does not have ON/OFF switch, please short circuit the ON/OFF switch wires when assemble the BMS to your pack.

48V 20A/25A 13S BMS/PCM for e-bike downtube batteries. This BMS is with small dimension(L80*W60*T10mm) with balance, ON/OFF switch, battery capacity LED and high temperature protection.

This battery management system(BMS) is suitable for most frame batteries, such as Hailong-02/03 casing battery, DA-5C Casing battery, DS-6 casing battery or new Polly DP-6 casing battery.

If your battery case has 5V USB output, you may also need to order a 5V PCB for your battery.

If your battery case does not have ON/OFF switch, please short circuit the ON/OFF switch wires when assemble the BMS to your pack.

36V 20A/25A 10S BMS/PCM for e-bike downtube batteries. This BMS is with small dimension(L80*W60*T10mm) with balance, ON/OFF switch, battery capacity LED and high temperature protection.

This battery management system(BMS) is suitable for most frame batteries, such as Hailong-02/03 casing battery, DA-5C Casing battery, DS-6 casing battery or new Polly DP-6 casing battery.

If your battery case has 5V USB output, you may also need to order a 5V PCB for your battery.

If your battery case does not have ON/OFF switch, please short circuit the ON/OFF switch wires when assemble the BMS to your pack.

20S, 24S, 60V/72V /84V lihtium-ion/LiFePO4 BMS/PCM with balance for e-motorcycle 30A,40A or 50A.

The BMS has short circuit, overvoltage/undervoltage protection, over current protection etc.

COMMON port means charging and discharging use the same port.

Separate port means charging and discharging use separate port.

There balance LED on the BMS which you can check if the cells are in balance or not, or you can find the "defective" cells which are not in balance status.

Smart lihtium battery management system/PCM for 12S, 13S, 14S or 15S Lithium LiFePO4, NiCoMn, LiMn2O4 etc diy battery packs. You can program the intelligent BMS/lithium battery on your computer and view all the parameters via your mobile(The Android APP can slightly modify parameter for the BMS while the IOS APP can only read datas and cannot modify data from mobile). Our ltihium battery BMS has been upgraded with alloy plates for better heat radiation, but the connection of the PCM has no changed.  We also provide smart BMS with larger serial from 7S~10S, 11S~15S(current less than 60A), 16S~ 20S PCM and 20S~ 30S BMS with software and mobile app control. 

The PCM is with blanace, standard UART COM, Short circuit protection, temperature(NTC) protection, overcharge protection, overdischarge protection, over current protection and under voltage protection etc.  Some Smart BMSs are available for RS232 and RS485 COM port, please email us if you need.

This smart BMS use the same COM for charging and discharging which means the max charging current could be larger. If you  need a battery charger for your diy packs, we also provide customized lihtium battery chargers.

If you need the  PCM communication software, app or connection diagram, please download from here: intelligent battery management specification